Use a Card Reader to Transfer Photos (Tech Tip Tuesday)

Tech Tip: Use a Card Reader to Transfer Photos

posted in: Tech Tips 0

Here’s a quick tip to help you transfer photos to your computer from a digital camera quicker and more reliably. This advice applies whether you have an inexpensive point and shoot or an expensive DSLR. Instead of connecting your camera directly to the computer with a cable, take out your memory card and put it in a card reader. If your computer includes a built-in memory card reader, you already have everything you need. If you don’t have a card reader, you can buy one for about $15 or less.

 

Why Use a Card Reader?

Reduce complexity

One of the reasons I recommend using a card reader is that it just takes a lot of the complexity out of the transfer. When you connect a card reader, it’s like you just added an extra drive to your computer, not a special camera device. The computer will let you easily view the files on the card just like any other drive, without trying to communicate with or control the camera. On Macs, some cameras like the GoPro won’t even let you directly preview images/video or remove files from the card when connecting the camera directly to the computer, because of the protocol used to communicate between the camera and the computer. Putting the card into a card reader allows you to access the card and have full functionality to transfer files, view disk space available, etc.

Speed up large transfers

While your camera works to transfer images to your computer, it may not be designed for the fastest transfer rates. Because card readers are specialized devices, they are engineered to maximize transfer speeds from card to computer. This can make a big difference when transferring a large number of photos, especially large photos and videos from modern digital cameras.

Avoid corrupted files

Transferring files from a camera runs a risk of a file corruption. One of the main reasons this can happen is if the camera batteries die during the file transfer/import. Card readers are simple devices that don’t require batteries so they don’t share the same risk. USB cables can also fail and be a source of corruption, so if you use a card reader connected directly to your computer, you reduce the possible points of failure. (Not all card readers connect directly to a computer though.)

Protect your camera from wear and tear

The final reason I recommend using a card reader is that they are relatively cheap. If something goes wrong with one, they are easy to replace. I’d rather not use my expensive camera for a job a $10 card reader can do better. By using a card reader, I avoid putting unnecessary wear on the camera, both on the internal card reading mechanisms as well as the port where the cord is plugged in.

Buying a Card Reader

Some computers have built-in card readers. If yours does and you are happy with it, you don’t need to purchase an external card reader. If you don’t have a built-in card reader, or if you feel your built-in reader is too slow, you can buy an inexpensive external card reader. When shopping for a card reader, look for one from a reputable brand and that supports USB 3.0. I don’t have a strong preference for specific models, but the card readers I use are from Transcend. I primarily use this Transcend Multi-Card Reader that reads Compact Flash, SD cards, and microSD cards. I also have this small Transcend SD Card Reader for SD cards and microSD cards.

Using a card reader can simplify and speed up your workflow, while protecting your images and your expensive equipment. With the cost so small, why not try one?

 

I hope you enjoyed this Tech Tip Tuesday! Comment below to let me know what you think, or if you have any questions about this or other topics you’d like me to cover in the future. Or contact me about my consulting services if you need more one-on-one advice.

 

My name is Kelley, and I am the owner of Kelley K Photography, a portrait photography business based in Smyrna, Georgia. I have been a member of the Click Pro network of photographers since 2016. In addition to photography, I have 20 years of experience in the IT industry, including consulting, technical writing, web design and hosting. I publish occasional Tech Tips on my blog, Instagram, and Facebook, as well as offering mentoring to photographers on technical issues relating to photography, from Lightroom to web hosting.

Subscribe to my Tuesday Tech Tips newsletter

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.